Full Ambidextrous AR15 with Hogue Ghillie Green Furniture and Cerakoting

Available on our Armslist store.  Sorry about the rotated pictures.

This rifle has been Cerakoted to compliment the ruberized Hogue furniture while increasing durability.  The 16 inch Faxon Firearms barrel combined with the Curse muzzle break and a mid length gas tube make this rifle a dream to shoot with virtually no muzzle rise or kick.  WMD Guns Nib-X bolt carrier mates up perfectly with the quality barrel while reducing the need to clean and lubricate the carrier which further improves reliability.  The lower receiver was modified to allow installation of the PDQ Ambidextrous bolt catch/release.  This simple modification works extremely well and puts the release within index finger range for right handed shooters.  The ambidextrous mag release from Knights Armarment was chosen due to the exceptional quality and reliability of KAC products.  Rubberized Hogue furniture combines the ability to easily accessorize and has several built in QD sling points built in.  A BCM endplate with a QD socket in the middle provides yet another mounting point.  

Build list:
Lower receiver: Aero Precision AR15 lower receiver, Gen 2 with upper tension screw. APAR501101
Trigger: ALG Defense QMS. 
Trigger Guard: Magpul OD Polymer
Grip: Hogue Ghillie Green with finger grooves. 15821
Stock: Hogue Ghillie Green with QD mounts and buffer tube kit. 15845 
Safety: CMMG Ambidextrous Safety (Not installed at the time of pictures)
Bolt catch/release: PDQ ambi bolt catch. PDQ-ABR-BL
Mag catch: Knights Armarment Ambi mag catch. KNAC20470
Magazines: C Products 30rd Stainless Steel with Anti Tilt Follower Quantity: 2
Upper Receiver: Aero Precision AR15 Upper receiver with standard parts kit. APAR501603
Charging Handle: BCM Ambidextrous Gunfighter
Gas Block: SLR Rifle Works. GB7
Gas Tube: WMD Guns Nitromet Gas Tube Mid Length. NMGTML
Bolt Carrier Group: NiB-X bolt carrier group, semi NIBXBCG-0003
Barrel: Faxon Firearms 16" GOV'T / SOCOM, 5.56 NATO, MID-LENGTH, 4150 QPQ 15A58M16NSQ

More Details:
Lower receiver: Aero Precision AR15 lower receiver, Gen 2 with upper tension screw. APAR501101
Our AR15 Gen 2 Stripped Lower Receiver is the perfect base for your custom AR15 build. Machined to mil-spec dimensions, our lowers work with standard AR15 components and ensure the highest quality with a correct component interface.

Gen 2 Improvements

  • Upper Tension Screw - Allows users to fine tune the fit of the upper and lower receiver through the use of a nylon tipped tensioning set screw inserted in the grip tang of the lower receiver. This provides a tight fit with any standard AR15 upper receiver.
  • Increased Magwell Flare - Allows for easier insertion of magazines and provides a sleeker look.


  • Stripped AR15 Lower Receiver, Gen 2
  • Nylon tipped tensioning set screw
Trigger: ALG Defense QMS.
Description: The ALG Defense Quality Mil-Spec (QMS) Trigger is designed for those shooters where tradition, value and regulatory concerns are of primary importance. The pull of the QMS is very similar to a standard mil-spec trigger, however the majority of the associated grittiness of the stock trigger pull has been removed while the well known reliability of a stock trigger remains. The pull weight is not lower than the M4/M16 minimum weight specification of 5.5lbs.
1. Performance Advantages for the Shooter
• The ALG Defense QMS trigger pull is smoother than a stock trigger. This is accomplished by honing the sear surfaces smooth while not removing metal below the valleys of the stock surface finish.
• Sear geometry has not been changed from standard so the high reliability that the stock trigger is known for is unchanged.
• Trigger and hammer are made from true 8620 alloy steel military specification castings, correctly carburized, quenched and tempered for high surface hardness.
• Disconnector is 1070 High Carbon steel properly Austempered into the spring range of hardness
• Springs are corrosion resistant and meet military specifications.
• A full force hammer spring is used for positive ignition of all type of ammunition.
• Trigger and hammer pins are improved over stock mild steel by using 4140 Chrome-Moly steel that has been quenched and tempered. Pins are centerless ground to a fine finish and a diameter 0.001” larger than stock to reduce play in the trigger assembly while retaining a slip fit into the weapon lower receiver.
• Pull weight is above the U.S. Military minimum pull weight of 5.5lbs but does not reach near the upper limit of 9.5lbs. Generally, the pull weight is about 6.5lbs.
2. Advantages for the Armorer
• The ALG Defense QMS trigger is an enhanced standard trigger so maintenance and installation procedures are unchanged.
• There is spare parts commonality between the QMS and stock triggers
• Trigger assembly parts may be interchanged between triggers, there are no matched sets.
• Since it is a trigger meeting the U.S. Military trigger specifications for the M4 Carbine, the ALG Defense QMS can be substituted for lower performing stock triggers while still staying in compliance with Unit or Departmental requirements.
Bolt catch/release: PDQ ambi bolt catch. PDQ-ABR-BL
PDQ Ambi-Bolt Release™
The new PDQ Ambi-bolt release™ puts the operator in control of the firing grip at all times. The trigger finger moves from trigger to mag release to bolt release smoothly without moving the weapon from the shoulder. That is why it is call PDQ (pretty dam quick). When seconds count and your life and others are depending on you. Count on PDQ The PDQ Ambi-Bolt Release™ Release is made in AMERICA, uses Military grade steel, hardened and Mil Spec 8526 Class 3 type 2 coated to last a life time of operational conditions.
Reloading with PDQ Ambi-Bolt Release™
When performing an emergency reload a shooter will typically use his left hand to insert a fresh magazine, press the bolt release, and return hand to shooting position. When using the new PDQ the shooter can now move from mag insertion directly back to shooting position. The trigger finger releases the bolt while the left hand returns to the shooting position.
Clearing a Double Feed with PDQ Ambi-Bolt Release™
While an advantage in firearms reloads, the PDQ advantage when clearing a double jam on the weapon is amazing. When a rifle malfunctions due to a double feed, the shooter will typically move the left hand to the bolt stop release and the right hand is now needed to activate the charging handle. This action is neither smooth or quick. Using the PDQ will allow the shooter to clear most double feed jams without ever removing his hand from the shooting grip. This action is not only faster but also more familiar. Whether in a competition or in a fight for your life the PDQ adds speed and reliability.
Mag catch: Knights Armarment Ambi mag catch. KNAC20470
Magazines: C Products 30rd Stainless Steel with Anti Tilt Follower Quantity: 2
Material: 400 Series Stainless
Follower: Plastic Anti-tilt Black/Orange
Spring: 17-7 Stainless Steel Polymer Coated
Upper Receiver: Aero Precision AR15 Upper receiver with standard parts kit. APAR501603
The AR15 Stripped Upper Receiver is one of our most popular products. Forged from 7075-T6 aluminum, this stripped upper is precision machined to mil-spec M16/M4 specifications and features M4 feedramps. Match this upper with one of our AR15 lower receivers for a solid and dependable fit.


  • M4 Feedramps
  • .250 takedown pin holes
  • Lazer engraved T-marks


  • AR15 Stripped Upper Receiver in Anodized Black
Gas Block: SLR Rifle Works. GB7
  GB-7 Micro Gas Block .750
  • Super High Quality gas blocks
  • 4140 Billet Steel
  • Melonite QPQ Finish
  • Set screws and roll pin included
Handguard: Hogue Free Float Forend with Overmolded gripping area and accessories Ghillie Green 15874
Weight: 15.6oz (not including accessories)
Internal Diameter: 1.625”
External Diameter: 2”
Length: 12.5”
2- 3 Hole Aluminum Rails
1- Polymer 2 Hole Tall Rail
1- Polymer 45 Degree Offset
1- Polymer Barricade Stop
1- Swivel Stud
1- QD Swivel Sleeve
1- Hex Wrench
7- Short Screws
6- Long Screws

Gas Tube:
 WMD Guns Nitromet Gas Tube Mid Length. NMGTML

Bolt Carrier Group: NiB-X bolt carrier group, semi NIBXBCG-0003
NiB-X AR-15 Semi Auto Bolt Carrier Group - POLISHED
All WMD BCG components are manufactured by Defense Industrial Base suppliers to WMD's exacting specifications to provide the best BCG available. Specifically engineered for NiB-X nickel boron coating to provide long life, high reliability and easy cleaning and maintenance. The BCG components are coated and polished to reduce fouling adherence. Coating is guaranteed for life against chipping, spalling or flaking. Over 30K rounds in Government protocol endurance testing did not wear the coating off. Especially beneficial in short barrel setups and suppressed platforms.
Bolt – Carpenter 158 heat-treated, shot-peened and magnetic particle inspected.  Engineered from  government drawings for NiB-X. Milspec gas rings. NiB-X coated (40% more wear-resistant than chrome).
Extractor – Manufactured, heat-treated, and hardened per government drawings.  NiB-X coated.
Firing Pin – Manufactured, heat-treated, hardened, chromed and certified per Government drawings.
Carrier – AR15 style semi auto, 8620 material, heat treated and case hardened. Manufacturing tolerances and surface finishes tightly controlled. NiB-X coated for durability and ease of cleaning.
Gas Key – Hardened to USGI specifications and attached using grade 8 hardened fasteners.  Permatex No. 3D Aviation Form a gasket Type III Sealing Compound per MIL-S-45180 used on assembly. NiB-X coated. Staked per military specifications.
Cam Pin – Manufactured, heat treated, hardened and certified per government drawings. NiB-X Coated.
Barrel: Faxon Firearms 16" GOV'T / SOCOM, 5.56 NATO, MID-LENGTH, 4150 QPQ 15A58M16NSQ
Faxon Firearms barrels are the pinnacle of value. Manufactured 100% in-house from cradle-to-grave, these barrels are fully stress releived, air-gauge tested, and 11 degree target crowned to ensure superior accuracy. 
Quality is imbuned into our barrels from the start. We start with the best materials, either certified 4150 Mil-Spec steel or 416-R Stainless. From there, each barrel goes through a battery of tests at each operation until finished in Nitride and final inspected. All barrels are individually checked for headspace by precision custom hardened gauges. 
Faxon manufactures all our barrels in Cincinnati, Ohio under our ISO:9001 and AS:9100  quality certifications. 
  • Barrel Material: 4150
  • Barrel Type: Button Rifled 
  • Barrel Caliber: 5.56 NATO
  • Barrel Twist: 1:8
  • Barrel Length: 16"
  • Barrel Profile: Gov't/SOCOM
  • Barrel Gas System: Mid Length
  • Inside Finish: QPQ Nitride
  • Outside Finish: QPQ Nitride
  • Muzzle Thread: 1/2-28 TPI (Threads Per Inch)
  • Gas Block Diameter: .750"
  • Gas Port Diameter: .081"
  • Gas Block Journal Length: 1.9"
  • Barrel Extension: M4
  • Weight: 1.65 lbs
  • Magnetic Particle Inspected!
  • 11-degree Target Crown

No comments:

Post a Comment